SOAP API Ref | Admin | TPA Service Category

TPA Service Category API | Administrative - SOAP

The TpaServiceCategory service provides functionality to manage service categories at the admin level, providing you the ability to integrate your existing systems with WCA in real time.

Service web methods
The following is a list of methods that are available for the TPAServiceCategory service.

AddTpaServiceCategory - This method is used to add a new service category for an administrator.
AddTpaServiceCategoryCode - This method is used to add a new service category code for an administrator.
DeleteTpaServiceCategory - This method is used to delete an existing administrator’s service category.
DeleteTpaServiceCategoryCode - This method is used to delete an existing administrator’s service category code.
UpdateTpaServiceCategory - This method is used to update an existing administrator’s service category.
UpdateTpaServiceCategoryCode - This method is used to update an existing administrator’s service category code.
GetServiceCategoryTemplate - Retrieves all default service category templates associated with your administrator instance of WCA.
GetServiceCategoryCodes - Retrieves default SCCs associated with service category templates.
GetMerchantCategoryCodes - Retrieves default MCCs associated with service category templates.

Service assumptions/business rules
The TPAServiceCategory service makes the following assumptions and enforces the following business rules:

Clients shall conform to the WS-I specifications unless otherwise agreed upon by Alegeus and the administrator.
Clients shall format SOAP messages in a document/literal format over HTTPS.
Clients shall have already created a valid user ID and password.
Clients shall have a valid session ID after being authenticated by the system. The session ID needs to be passed in the proper manner as described in the manager service guide.
If the administrator uses the same user ID and password for all of their clients, they are responsible for managing the security of the data.
Clients should validate data before submitting a request to this service. This facilitates better performance and accurate processing on both systems.
Clients shall not attempt to use this service for batch processing of large amounts of data. The service is designed for synchronous calls that send or retrieve small chunks of data. If batch processing is required, then the EDI process should be used.
If any method fails, the service returns a SOAP fault describing the problem.

AddTpaServiceCategory

This method is used to add a new service category for an administrator.

History
The AddTpaServiceCategory methods are listed below:

Request messages

• AddTpaServiceCategory request

Response messages

• AddTpaServiceCategory response

AddTpaServiceCategory request/response messages
The AddTpaServiceCategory method requires the following request and response messages (input and output data).

The table below includes the following request messages:

• AddTpaServiceCategoryRequest

Response Message: Empty Message

Example of AddTpaServiceCategory SOAP Request Message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBISessionHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">    
  <MBISessionID>string</MBISessionID>
    </MBISessionHeader>
  </soap:Header>
  <soap:Body>
    <AddTpaServiceCategory
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Request/2008/0
7">
      <request>
        <TpaId>string</TpaId>
        <ServiceCategoryId>string</ServiceCategoryId>
        <ServiceCategoryName>string</ServiceCategoryName>
        <ServiceCategoryMaximumTransactionAmount>decimal</ServiceCategoryMaximumTransactionAmount
>
        <ServiceCategoryMaximumTotalAmount>decimal</ServiceCategoryMaximumTotalAmount>
      </request>
    </AddTpaServiceCategory>
  </soap:Body>
</soap:Envelope>

Example of AddTpaServiceCategory SOAP Response Message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBIMessageIdHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MessageId>string</MessageId>
    </MBIMessageIdHeader>
  </soap:Header>
  <soap:Body>
    <AddTpaServiceCategoryResponse
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Response/2008/
07">
      <AddTpaServiceCategoryResult />
    </AddTpaServiceCategoryResponse>
  </soap:Body>
</soap:Envelope>

Example client code
The following is an example of the client code (using a .NET proxy class for accessing the service) used when submitting calling the AddTpaServiceCategory web method.

try
{
            // create new SOAP header for the user’s current session id
localhost.MBISessionHeader sh = new localhost.MBISessionHeader();
            // create the proxy object for the service 
localhost.TpaServiceCategoryService proxy = new localhost.TpaServiceCategoryService();
 // create a new request object for the method’s parameters 
localhost.AddTpaServiceCategory request = new localhost.AddTpaServiceCategory();
// set the parameters for the web method call                             
request.TpaId = "T00021";        
request.ServiceCategoryId = "MedSC";         
request.ServiceCategoryName = "Medical"; 
request.ServiceCategoryMaximumTransactionAmount = 20.00D; 
request.ServiceCategoryMaximumTotalAmount = 100.00D;
// Add the session SOAP header so that the service knows who we are.
// Note that we stored the session ID in a member variable after
// logged in to the system for future web method calls.                  
            sh.MBISessionID = _sessionID;  proxy.MBISessionHeaderValue = sh;
// Call the web method.
       proxy.AddTpaServiceCategory(request); 
        MessageBox.Show("Finished"); 
}
catch(SoapException se)
{
        // perform needed operations
}
catch(Exception ex)
{
        // perform needed operations
}

AddTpaServiceCategoryCode

This method is used to create a new service category code for an administrator.

History

The AddTpaServiceCategoryCode methods are listed below:

Request Messages

• AddTpaServiceCategoryCodeRequest

Response Messages

• AddTpaServiceCategoryCodeResponse

AddTpaServiceCategoryCode Request/Response Messages

The AddTpaServiceCategoryCode method requires the following request and response messages (input and output data).

The table below includes the following request messages:

• AddTpaServiceCategoryCodeRequest

Response Message: Empty message.

Example of AddTpaServiceCategoryCode SOAP request message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBISessionHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MBISessionID>string</MBISessionID>
    </MBISessionHeader>
  </soap:Header>
  <soap:Body>
    <AddTpaServiceCategoryCode
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Request/2008/07">
      <request>
        <TpaId>string</TpaId>
        <ServiceCategoryId>string</ServiceCategoryId>
        <ServiceCategoryCode>string</ServiceCategoryCode>
        <ServiceCategoryCodeDescription>string</ServiceCategoryCodeDescription>
        <BypassDeductible>boolean</BypassDeductible>
      </request>
    </AddTpaServiceCategoryCode>
  </soap:Body>
</soap:Envelope>

Example of AddTpaServiceCategoryCode SOAP response message:

HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBIMessageIdHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MessageId>string</MessageId>
    </MBIMessageIdHeader>
  </soap:Header>
  <soap:Body>
    <AddTpaServiceCategoryCodeResponse
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Response/2008/07">
      <AddTpaServiceCategoryCodeResult />
    </AddTpaServiceCategoryCodeResponse>
  </soap:Body>
</soap:Envelope>

Example client code

The following is an example of the client code (using a .NET proxy class for accessing the service) used when submitting calling the AddTpaServiceCategoryCode web method.

try
{
            // create new SOAP header for the user’s current session id
localhost.MBISessionHeader sh = new localhost.MBISessionHeader();
            // create the proxy object for the service 
localhost.TpaServiceCategoryService proxy = new localhost.TpaServiceCategoryService();
            // create a new request object for the method’s parameters 
localhost.AddTpaServiceCategoryCode request = new localhost.AddTpaServiceCategoryCode();
// set the parameters for the web method call                           
request.TpaId = "T00021";       
  request.ServiceCategoryId = "MedSC"; 
request.ServiceCategoryCode = "MDC";
 request.ServiceCategoryCodeDescription = "MDC – medical descript"; 
request.BypassDeductible = true
// Add the session SOAP header so that the service knows who we are.
// Note that we stored the session ID in a member variable after
// logged in to the system for future web method calls.                  
            sh.MBISessionID = _sessionID; 
            proxy.MBISessionHeaderValue = sh;
// Call the web method.
      proxy.AddTpaServiceCategoryCode(request); 
        MessageBox.Show("Finished"); 
}
catch(SoapException se)
{
        // perform needed operations
}
catch(Exception ex)
{
        // perform needed operations
}

DeleteTpaServiceCategory

This method is used to delete an existing service category.

History
The DeleteTpaServiceCategory methods are listed below:

Request Messages

• DeleteTpaServiceCategoryRequest

Response Messages

• DeleteTpaServiceCategoryResponse

DeleteTpaServiceCategory request/response messages
The DeleteTpaServiceCategory method requires the following request and response messages (input and output data).

The table below includes the following request messages:

• DeleteTpaServiceCategoryRequest

Response Message: Empty message.

Example of DeleteTpaServiceCategory SOAP request message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBISessionHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MBISessionID>string</MBISessionID>
    </MBISessionHeader>
  </soap:Header>
  <soap:Body>
    <DeleteTpaServiceCategory
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Request/2008/07">
      <request>
        <TpaId>string</TpaId>
        <ServiceCategoryId>string</ServiceCategoryId>
      </request>
    </DeleteTpaServiceCategory>
  </soap:Body>
</soap:Envelope>

Example of DeleteTpaServiceCategory SOAP response message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBIMessageIdHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MessageId>string</MessageId>
    </MBIMessageIdHeader>
  </soap:Header>
  <soap:Body>
    <DeleteTpaServiceCategoryResponse
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Response/2008/07">
      <DeleteTpaServiceCategoryResult />
    </DeleteTpaServiceCategoryResponse>
  </soap:Body>
</soap:Envelope>

Example client code
The following is an example of the client code (using a .NET proxy class for accessing the service) used when submitting calling the DeleteTpaServiceCategory web method.

try
{
            // create new SOAP header for the user’s current session id
localhost.MBISessionHeader sh = new localhost.MBISessionHeader();
 // create the proxy object for the service 
localhost.TpaServiceCategoryService proxy = new localhost.TpaServiceCategoryService(); 
// create a new request object for the method’s parameters 
localhost.DeleteTpaServiceCategory request = new localhost.DeleteTpaServiceCategory();   
// set the parameters for the web method call  
          request.TpaId = "T00021";
          request.ServiceCategoryId = "MedSC";
// Add the session SOAP header so that the service knows who we are.
// Note that we stored the session ID in a member variable after
// logged in to the system for future web method calls.                
            sh.MBISessionID = _sessionID; 
            proxy.MBISessionHeaderValue = sh;
// Call the web method.
       proxy.DeleteTpaServiceCategory(request); 
        MessageBox.Show("Finished"); 
}
catch(SoapException se)
{
        // perform needed operations
}
catch(Exception ex)
{
        // perform needed operations
}

DeleteTpaServiceCategoryCode

This method is used to delete an existing Administrator’s Service Category Code.

History
The DeleteTpaServiceCategoryCode methods are listed below:

Request Messages

• DeleteTpaServiceCategoryCodeRequest

Response Messages

• DeleteTpaServiceCategoryCodeResponse

DeleteTpaServiceCategoryCode request/response messages

The DeleteTpaServiceCategoryCode method requires the following request and response messages (input and output data).

The table below includes the following request messages:

• DeleteTpaServiceCategoryCodeRequest

Response Message: Empty message.

Example of DeleteTpaServiceCategoryCode SOAP request message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBISessionHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MBISessionID>string</MBISessionID>
    </MBISessionHeader>
  </soap:Header>
  <soap:Body>
    <DeleteTpaServiceCodeCategory
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Request/2008/07">
      <request>
        <TpaId>string</TpaId>
        <ServiceCategoryId>string</ServiceCategoryId>
        <ServiceCategoryCode>string</ServiceCategoryCode>
      </request>
    </DeleteTpaServiceCodeCategory>
  </soap:Body>
</soap:Envelope>

Example of DeleteTpaServiceCategoryCode SOAP response message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBIMessageIdHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MessageId>string</MessageId>
    </MBIMessageIdHeader>
  </soap:Header>
  <soap:Body>
    <DeleteTpaServiceCategoryCodeResponse
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Response/2008/07">
      <DeleteTpaServiceCategoryCodeResult />
    </DeleteTpaServiceCategoryCodeResponse>
  </soap:Body>
</soap:Envelope>

Example client code

The following is an example of the client code (using a .NET proxy class for accessing the service) used when submitting calling the DeleteTpaServiceCategoryCode web method.

try
{
            // create new SOAP header for the user’s current session id
localhost.MBISessionHeader sh = new localhost.MBISessionHeader();  
            // create the proxy object for the service 
localhost.TpaServiceCategoryService proxy = new localhost.TpaServiceCategoryService();      
     // create a new request object for the method’s parameters   
  localhost.DeleteTpaServiceCategoryCode request = new localhost.DeleteTpaServiceCategoryCode();
// set the parameters for the web method call                     
        request.TpaId = "T00021"; 
request.ServiceCategoryId = "MedSC"; 
request.ServiceCategoryCode = “SCCDE”              
// Add the session SOAP header so that the service knows who we are.
// Note that we stored the session ID in a member variable after
// logged in to the system for future web method calls.                  
            sh.MBISessionID = _sessionID; 
proxy.MBISessionHeaderValue = sh;
// Call the web method.
      proxy.DeleteTpaServiceCategoryCode(request); 
        MessageBox.Show("Finished"); 
}
catch(SoapException se)
{
        // perform needed operations
}
catch(Exception ex)
{
        // perform needed operations
}

UpdateTpaServiceCategory

The method is used to update an existing service category.

History
The UpdateTpaServiceCategory methods are listed below:

Request messages

• UpdateTpaServiceCategoryRequest

Response messages

• UpdateTpaServiceCategoryResponse

UpdateTpaServiceCategory request/response messages

The UpdateTpaServiceCategory method requires the following request and response messages (input and output data).

The table below includes the following request messages:

• UpdateTpaServiceCategoryRequest

Response message: Empty message.

Example of UpdateTpaServiceCategory SOAP request message:

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBISessionHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MBISessionID>string</MBISessionID>
    </MBISessionHeader>
  </soap:Header>
  <soap:Body>
    <UpdateTpaServiceCategory
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Request/2008/07">
      <request>
        <TpaId>string</TpaId>
        <ServiceCategoryId>string</ServiceCategoryId>
        <ServiceCategoryName>string</ServiceCategoryName>
        <ServiceCategoryMaximumTransactionAmount>decimal</ServiceCategoryMaximumTransactionAmount>
        <ServiceCategoryMaximumTotalAmount>decimal</ServiceCategoryMaximumTotalAmount>
      </request>
    </UpdateTpaServiceCategory>
  </soap:Body>
</soap:Envelope>

Example of UpdateTpaServiceCategory SOAP response message

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBIMessageIdHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MessageId>string</MessageId>
    </MBIMessageIdHeader>
  </soap:Header>
  <soap:Body>
    <UpdateTpaServiceCategoryResponse
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Response/2008/07"> 
  <UpdateTpaServiceCategoryResult />
    </UpdateTpaServiceCategoryResponse>
  </soap:Body>
</soap:Envelope>

Example client code
The following is an example of the client code (using a .NET proxy class for accessing the service) used when submitting calling the UpdateTpaServiceCategory web method.

try
{
            // create new SOAP header for the user’s current session id
localhost.MBISessionHeader sh = new localhost.MBISessionHeader();  
            // create the proxy object for the service 
localhost.TpaServiceCategoryService proxy = new localhost.TpaServiceCategoryService(); 
 // create a new request object for the method’s parameters
 localhost.UpdateTpaServiceCategory request = new localhost.UpdateTpaServiceCategory();            
// set the parameters for the web method call           
                     request.TpaId = "T00021";        
request.ServiceCategoryId = "MedSC";       
   request.ServiceCategoryName = "Medical"; 
request.ServiceCategoryMaximumTransactionAmount = 20.00D; 
request.ServiceCategoryMaximumTotalAmount = 100.00D;       
// Add the session SOAP header so that the service knows who we are.
// Note that we stored the session ID in a member variable after
// logged in to the system for future web method calls.                  
            sh.MBISessionID = _sessionID; 
proxy.MBISessionHeaderValue = sh;
// Call the web method.
       proxy.UpdateTpaServiceCategory(request); 
        MessageBox.Show("Finished"); 
}
catch(SoapException se)
{
        // perform needed operations
}
catch(Exception ex)
{
        // perform needed operations
}

UpdateTpaServiceCategoryCode

This method is used to update an existing service category code.

History
The UpdateTpaServiceCategoryCode methods are listed below:

Request messages

• UpdateTpaServiceCategoryCodeRequest

Response messages

• UpdateTpaServiceCategoryCodeResponse

TpaServiceCategoryCode request/response messages

The table below includes the following request messages:

• UpdateTpaServiceCategoryRequest

Response message: Empty message.

Example of UpdateTpaServiceCategoryCode SOAP request message

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBISessionHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MBISessionID>string</MBISessionID>
    </MBISessionHeader>
  </soap:Header>
  <soap:Body>
    <UpdateTpaServiceCategoryCode
xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Request/2008/07">
      <request>
        <TpaId>string</TpaId>
        <ServiceCategoryId>string</ServiceCategoryId>
        <ServiceCategoryCode>string</ServiceCategoryCode>
        <ServiceCategoryCodeDescription>string</ServiceCategoryCodeDescription>
        <BypassDeductible>boolean</BypassDeductible>
      </request>
    </UpdateTpaServiceCategoryCode>
  </soap:Body>
</soap:Envelope>

Example of UpdateTpaServiceCategoryCode SOAP response message

<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
  <soap:Header>
    <MBIMessageIdHeader xmlns="http://www.medibank.com/MBIWebServices/SoapHeader/">
      <MessageId>string</MessageId>
    </MBIMessageIdHeader>
  </soap:Header>
  <soap:Body>
    <UpdateTpaServiceCategoryCodeResponse xmlns="http://www.medibank.com/MBIWebServices/Tpa/Messages/TpaServiceCategory/Response/2008/07">
      <UpdateTpaServiceCategoryCodeResult />
    </UpdateTpaServiceCategoryCodeResponse>
  </soap:Body>
</soap:Envelope>

Example client code

The following is an example of the client code (using a .NET proxy class for accessing the service) used when submitting calling the UpdateTpaServiceCategoryCode web method.

try
{
            // create new SOAP header for the user’s current session id
localhost.MBISessionHeader sh = new localhost.MBISessionHeader();  
            // create the proxy object for the service 
localhost.TpaServiceCategoryService proxy = new localhost.TpaServiceCategoryService(); 
            // create a new request object for the method’s parameters 
localhost.UpdateTpaServiceCategoryCode request = new localhost.UpdateTpaServiceCategoryCode();          
// set the parameters for the web method call    
request.TpaId = "T00021"; 
request.ServiceCategoryId = "MedSC"; 
request.ServiceCategoryCode = "MDC";
request.ServiceCategoryCodeDescription = "MDC – medical descript"; 
request.BypassDeductible = true;              
// Add the session SOAP header so that the service knows who we are.
// Note that we stored the session ID in a member variable after
// logged in to the system for future web method calls.              
            sh.MBISessionID = _sessionID; 
proxy.MBISessionHeaderValue = sh;
// Call the web method.
      proxy.UpdateTpaServiceCategoryCode(request); 
        MessageBox.Show("Finished"); 
}
catch(SoapException se)
{
        // perform needed operations
}
catch(Exception ex)
{
        // perform needed operations
}

GetServiceCategoryTemplate

Retrieves all default service category templates associated with your administrator instance of WCA.

History
The GetServiceCategoryTemplate methods are listed below:

Request messages

• GetServiceCategoryTemplateRequest

Response messages

• GetServiceCategoryTemplateResponse

GetServiceCategoryTemplate request/response messages

The GetServiceCategoryTemplate method requires the following request and response messages (input and output data).

The table below includes the following request messages:

• GetServiceCategoryTemplateRequest

The table below includes the following response messages:

• GetServiceCategoryTemplateResponse

GetServiceCategoryCodes

Retrieves default SCCs associated with service category templates.

History
The GetServiceCategoryCodes methods are listed below:

Request messages

• GetServiceCategoryCodesRequest

Response messages

• GetServiceCategoryCodesResponse

GetServiceCategoryCodes Request/Response Messages
The GetServiceCategoryCodes method requires the following request and response messages (input and output data).

The table below includes the following request messages:

• GetServiceCategoryCodesRequest